Ruger Mark IV Target Handgun .22 LR 10rd Magazines(2) 5.5″ Barrel Adjustable CA Compliant

Effortlessly strip and clean your Ruger Mark IV with a simple one-button takedown feature. With just the press of a button, the barrel and receiver assembly can be easily removed without any additional tools. The advanced cold hammer-forged barrel of the Ruger Mark IV ensures precise rifling for exceptional accuracy and lasting durability. The contoured ejection port and easy-to-grasp bolt ears allow for reliable performance round after round.

Drilled and Tapped Receiver For Optics

For added versatility, the Ruger Mark IV sighting system has a drilled and tapped receiver for mounting Weaver or Picatinny-style rails for optics. The ambidextrous manual safety can also be converted to left-side only use with the included washer. Easily reload with the convenient push-button magazine release on the left side of the frame and enjoy the added safety of the magazine disconnect, which prevents discharge when the magazine is removed. With the two included 10-round magazines, you’ll be ready for any shooting scenario with the Ruger Mark IV.

Key Features:

– Quick and simple takedown with the press of a single button, making it easy to clean the chamber to the muzzle. Pushing a button on the back of the frame allows the barrel and receiver to tilt up and detach from the grip frame without any tools.

– One-piece grip frame precisely CNC-machined for durability.

– Cold hammer-forged barrel ensures precise rifling for excellent accuracy and long-lasting use.

– Improved bolt stop for ergonomic handling.

– Comfortable and contoured grip with a natural pointing angle and replaceable grip panels for a secure hold.

– Internal bolt construction guarantees consistent alignment with the barrel, resulting in better accuracy than traditional slide designs.

– Streamlined ejection port and easy-to-grip bolt ears for reliable operation round after round.

– Drilled and tapped receiver for easy mounting of optics on a Weaver or Picatinny-style rail.

– Convenient push-button magazine release located on the left side of the frame.

– Magazine drops freely for quick reloading.

– Includes two 10-round magazines for extended use.

Specifications:

– Chambered in .22 LR.

– Holds 10 rounds.

– Made of sturdy alloy steel.

– Fixed front sight.

– Barrel length of 5.50 inches.

– Grip frame made of lightweight aluminum.

– Checkered synthetic grips for a secure hold.

– Finished with a blued coating.

– Width of 1.20 inches.

– Adjustable rear sight.

– Bull barrel design.

– Weighs 35.6 ounces.

– Length of 9.75 inches.

– Height of 5.50 inches.

– Features 6 grooves.

– Has a twist rate of 1:16″ RH.

– Available in California.

– Not available in Massachusetts.

Can The Ruger Mark IV Slab Sided Barrel Be Threaded?

Yes, the Ruger Mark IV slab sided barrel can be threaded for a suppressor or muzzle device. However, the work should be done by a qualified gunsmith with the proper tools and experience to ensure it is done correctly and safely.

How To Clean Ruger Mark IV?

1. Disassemble the Firearm

First and foremost, ensure that your firearm is unloaded and disassembled according to the manufacturer’s instructions. This will prevent any accidents while cleaning.

2. Clean the Barrel

Using a bore brush and solvent, clean the barrel of your Ruger Mark IV. Run the bore brush back and forth through the barrel a few times, and then use a clean patch to remove any excess solvent and debris. Repeat this process until the patch comes out clean.

3. Clean the Slide and Frame

Using a clean cloth or gun cleaning patches, wipe down the slide and frame of your firearm. Make sure to remove any excess oil, dirt, or debris from all the nooks and crannies.

4. Clean the Magazine

Remove the magazine from the firearm and clean it with a cloth or gun cleaning patches. Use solvent to remove any buildup or debris, and then wipe it dry. Make sure to also clean the magazine well on the firearm.

5. Lubricate

Apply a small amount of gun oil or lubricant to all moving parts, such as the trigger and slide rails. Use a clean cloth to spread the lubricant evenly and to remove any excess.

6. Reassemble the Firearm

Once all the individual parts are clean and lubricated, reassemble your Ruger Mark IV according to the manufacturer’s instructions.

7. Clean the Exterior

Using a clean cloth, wipe down the exterior of your firearm to give it a polished finish. You can also use a gun-specific cleaning solution to remove any stubborn dirt or residue on the surface.

8. Store Safely

After cleaning, store your firearm in a safe and secure location. This will help prevent any damage and ensure that it is ready for use when needed.

Tips:

– It is recommended to clean your Ruger Mark IV after every use to prevent buildup of dirt, debris, and residue.

– Use a gun cleaning mat to protect your work surface and to easily keep track of small parts.

– If you are not comfortable cleaning your firearm yourself, consider taking it to a professional gunsmith for a thorough cleaning.